Slitting machine has a set of safe operating specifications, so how to proceed? Let's take a look at the safety operation specifications of the cutting machine with the cutting machine manufacturer.
        1. The input voltage is three live wires and one neutral wire. When closing and pulling the brake, you should hold the porcelain handle to avoid electric shock.
        2. Use an Allen wrench every day to check whether the Phillips screw of the rewinding shaft is firm. If it is loose, tighten it in time.
        3. Keep the machine clean. Wipe off the oil in time and remove the wrapped plastic strips.
        4. Feeding: The two large rubber shafts on the slitting machine cannot be passed through to avoid stinging.
        5. Distinguish the edge selection of the electric eye, distinguish between manual and automatic. When manually, you can move the reel to the left and right, and dial to manual when the machine is turned off.
        6. When cutting, use the handwheel to adjust the left and right devices for feeding, and it is better to close the car in the middle of the two switches.

        After reading the above content, I believe that everyone already knows the safe operation specifications of the slitting machine.