For the program-controlled paper cutter, we may encounter that its cut out paper does not meet the requirements, but the cutter of the paper cutter and its presser have good working performance, but their aspects are not vertical enough, so In the middle of the cutting surface, an arc-shaped concave shape will be generated, so that there is a distance difference of 1-5 mm between the middle and the upper and lower lengths.

        When our program-controlled paper cutting machine has good working performance, if its cutting surface is curved, it may be due to the improper angle of its cutting edge. In the actual operation process, if the ordinary offset paper should be cut for coated paper, but the cutter is not replaced, the blade angle will be inappropriate, so the size of the cut paper will not be the same. Suitable. But when we replaced its cutter, the paper it cut out was normal again. At the same time, after measurement, we found that the blade angle of these two types of cutters is only 2 degrees, but the difference in the size of the cut paper is more obvious, which also shows that in the program-controlled cutter, There is a close relationship between the choice of mouth angle and the quality of the product cut out.