1. Receiving mechanism and tensioning device: The receiving mechanism of the paper slitting machine is mainly composed of a chain, a synchronous wheel, a magnetic powder clutch and an air expansion shaft. As long as the adjustment is made, the two reels are controlled by a single motor. The current of the magnetic powder clutch can change the tension of the receiving shaft.
2. Paper slitter frame and transmission system: The paper slitter frame consists of left and right wall panels, support blocks and unloading mechanism. The drive system is mainly used to pull raw materials and wind the finished product. It is driven by a variable frequency stepless speed regulating motor through a motor V belt to drive the rubber roller. The main traction rubber roller and the driven traction rubber roller are in close contact with each other. The traction material is driven and the lower circular cutter shaft is operated synchronously by the active traction rollers for better cutting requirements. The lower circular cutter shaft drives the winding A and the winding B to perform synchronous operation to achieve the purpose of receiving the material.
3. Longitudinal cutter holder: The longitudinal cutter holder of the paper slitting machine has a circular knife slitting and a straight knife slitting. The operating handle allows the circular knife to move slightly axially, and the round blade and the cushion cover are adjusted by the planar cam. The shear gap of the groove.
4. Waste rewinding and discharge: The waste is discharged through the duct by the wind of the blower.
5. Traction member: The traction member of the paper slitting machine is mainly composed of a pair of traction rubber rollers and a plurality of hard alumina rollers, which are used for taking out the raw materials of the finished winding. Power is obtained from the motor through V. The belt is passed to the active traction roller for operation.

6. Discharge mechanism and automatic rectification: The discharge mechanism is mainly composed of a discharge shaft, a support block, a cylinder, a base, a left and right moving seat, etc., and is composed of an automatic correction device: a photoelectric opening, a correction guide roller, left and right brackets, a correction moving plate and a ball. . Nuts and screws, synchronous motor and left and right limit switches.