1. If you encounter a problem that cannot be solved, first stop and ask for help. Never continue to run the machine under abnormal conditions.
        2. Safety production is a necessary premise, and safety must be paid attention to during operation.
        3. When adjusting the knife, first clean the dust with an air gun, and then carry out the knife adjustment process.
        4. For some problems with the base paper core, pay attention to the proper chuck clamping of the original paper core.
        5. Cut and pull out the air shaft, you must add support water pipes on both sides, pay attention to pull out the air shaft safely.
        6. When blowing, first stop the machine and put the paper into the tube, then restart
        7. When you encounter an abnormal problem, you must press the red button to stop the machine when you want to stop the machine. Develop the right emergency stop habits.
        8. In the case of padding, keep a certain distance from the plastic shaft and the paper tray to avoid injury.
        9. When the base paper passes the original paper, the paper roll must be stopped when the paper roll is over, and then the paper is adjusted.
        10 When using an air gun to clean the dust on the knife, first test the spray for a period of time to drain the water inside. If the gas from the air gun has water, use a rag to dry the shaft and continue.
         11. When dealing with the bad paper of the base paper, use the knife slide, be careful not to slip the inner paper.
         12. When blowing edges, pay attention to the stability of the flash when accelerating.
         13. When the original paper core is deformed and the base paper is rotated slowly, pay attention to the speed adjustment to slow down as much as possible.

         14. When the base paper is cut to the end, slow down the speed to avoid paper breakage.