News

You are here: Home » News

What are the faults of the paper bag machine equipment

  • Publish Time: 2020-09-04
  • Visit: 926
The computer controller of the paper bag machine often has some failures. In order to solve these failures, we need to know the type of failure and the solution. If you can't start by pressing the start button, you need to turn off the power and restart, and then check whether the inverter alarms. Also need to check whether the intermediate relay is working properly, if not, replace it.
③ Check whether the voltages of U, V, W, and 380V are normal. If they are normal, replace the motor.
2. The computer screen does not display or the keys fail:
① First check whether the switching power supply has DV 24V voltage output. Or the proximity switch is damaged and disconnected, causing the power indicator to not light, and there is no 24V output.
② Replace the proximity switch or switching power supply.
③ Replace the computer.
3. The machine can be started, but the feeding rubber roller does not rotate or feed:
① Check whether the servo drive has alarms. If there is no alarm, replace the servo drive.
② Check whether the proximity switch is burnt out. If it burns out, replace the proximity switch.
③ Replace the servo motor.
4. The machine starts to work, but the feeding rubber roller is feeding slowly or feeding for a long time:
① Mainly check whether the current value of the "pulse equivalent" parameter in the computer "modification" is "0.107".
5. The rear discharge DC motor or conveyor belt motor does not rotate or work:
 ① Check whether the over-current indicator on the upper left corner of the DC motor speed control board is on. If the over-current indicator is on, turn off the main power supply for 5 seconds and then power on. If the over-current indicator is still on, please replace the DC motor speed control board.
② Check whether the speed regulating potentiometer is out of order, if it fails, replace the potentiometer.
③ Check whether the carbon brushes of the DC motor are excessively worn. If they are excessively worn, replace the carbon brushes.
6. The punching machine does not punch or penetrate the material:
① First check the parameter settings in the computer: whether the current value of "punching delay" is "50-80" milliseconds, whether the current value of "punching delay" is "30" milliseconds, and whether the current value of "function 17 port" is "1 punching" "
② Check whether the punching machine is worn
③ Check whether the air pressure is above 0.6MPA
④ Check whether the perforated intermediate relay works normally (replace)

⑤ Check whether the solenoid valve is damaged (replace)

Previous:
The specific steps of paper bag machine maintenance
Next:
What kind of kraft paper bag made by kraft paper bag machine