The mounting method of the hot film dedicated to the automatic laminating machine on the equipment heated to a certain temperature (about 100-180 °C) is called hot laminating, which can be divided into single-sided hot lamination and double-sided hot lamination because of its light permeability And good waterproof, good heat resistance, strong hardness, suitable for post-production of advertising pictures based on lights or other occasions. However, hot laminating equipment and consumables are more expensive, complicated to operate, consume more energy, and cost more.
1. The product to be constructed by the automatic laminator must be straight. Handle uneven paper with "lotus edge" and "tight edge" phenomena. Paper with "lotus edge" can be baked, and paper with "tight edge" can be hung.
2. Be sure to wait for the blot to dry before coating, otherwise it will cause blistering or hair pulling.

3. Spray as little powder as possible during printing, otherwise it will cause emptying and blistering at the powder pile. Before the computer bronzing machine works, the powder should be disposed of. If the number of prints is large, it can be hung to dry to remove the powder, and if the number of prints is small, it can be wiped manually.