Inspection work before laminating machine:
        1. Confirm whether the machine is in a safe state.
        2. Film transport adjustment to make the film tension even to adapt to the film transport tension.
        3. Check whether the gap between the glue roller and the glue is parallel.
        4. Check the temperature of the heating roller to avoid inaccurate thermometer.
        5. The pressure that the pressure gauge must reach, otherwise the pressure will affect the product.
        6. Clean the sundries on the rubber roller, so as not to cause waste in the finished product.

        Fully automatic laminating is to apply plastic adhesive to the plastic film and print it with paper as the substrate, press it together with the rubber roller and the heating roller to form a product of paper and plastic. Can be divided into mica tape coating, paper coating, advertising consumables coating, aluminum foil coating, suitable for: paper, film, PE, PVC and other roll composite. The fully automatic laminating machine is customized for the world's largest lens manufacturer. It realizes automatic film sticking and protects the lens to prevent the subsequent process from scratching the lens.