After the small laminating machine is adjusted, the pre-processed printed matter is sent to the paper feeding mechanism for laminating, and samples are taken for inspection. Use a small amount of printed matter to inspect before laminating, so as not to cause a lot of waste. After passing the inspection, mass production can be carried out. The method of using the film inspection is as follows:
        1. Tear off the corner of the proof sheet completed by the lamination in the width direction, press and hold the paper, and tear it all in the width direction. After tearing off all the tears, if the graphic imprint on the surface of the printed matter follows the glue layer and the fiber of the paper Transferred to the film, it means that the printed matter and the film adhere well, and it is a qualified product.
        2. Put the film-coated sample into the drying tunnel and bake at 60-65 degrees Celsius for about 30 minutes. If there is no blistering, no delamination and no wrinkles will occur, and it is a qualified product. After baking, the tear film should not be separated from the paper intact.
         3. Immerse the sample in cold water for 1 hour and take it out. If the plastic film is not separated from the printed product, it is a qualified product.
        4. Put the sample on the creasing machine and apply pressure. If the pressed uneven part does not delaminate, it is a qualified product.
        In summary, after one or more inspection methods meet the requirements of the sample of the small laminator, it can be put into mass production. If it does not meet the requirements, the sample fails, the pressure adjustment process is retested, until the inspection is qualified.
        Application range of small laminating machine
        1. Scope of processing: Use PVC cladding panel furniture, speakers, cabinets, craft doors, anti-theft doors, molded doors, panel door covers, decorative wall skirt boards, etc.
        Second, the range of substrates used: medium and high density fiberboard, plywood, solid wood board, metal board, gypsum board, magnesite board, etc.
        3. Equipment characteristics:
        1. Using digital display automatic control technology, easy operation and high degree of automation.
        2. Adopt vacuum technology to double air passage, stable air performance, high workpiece yield.
        3. The working table adopts frame steel frame structure, which effectively improves the vacuum degree and is durable. The exchangeable workbench can carry out a box of multiple pieces of veneer, so that one machine can be used for multiple purposes.
        4. A unique far infrared constant temperature heating system is adopted to save energy, time and electricity. Heating is uniform, thereby reducing the deformation, wrinkling, degumming and other phenomena of the product.

        5. The key components of the electronic control system are configured with high temperature resistance and high insulation materials, and the operation is safe and reliable.