How to operate the paper cutter is safe? Today I will explain to you in detail.
        1. Before using the paper cutter, check the machine and do a good job of cleaning. Fill each oil hole with lubricating oil.
        2. After the paper cutter is turned on, first check whether the photoelectric protection switch is normal and reliable, and then try the empty knife three times to observe whether there is a return knife. If a problem is found, it should be eliminated in time.
        3. When the machine is running, it is strictly forbidden to put your hand into the machine. If there is a fault, it is strictly forbidden to grab the paper by hand. It should be stopped immediately. When the cutter does not return to a stable position, it is forbidden to reach for the paper to prevent hand injury or accident.
        4. Super-high operation is strictly prohibited when cutting or cutting the product. After checking the correct size, the knife can be lowered. When the blade is blunt, the blade should be replaced immediately. Do not use it intermittently to avoid damage to the machine due to excessive load.
        5. When adjusting and replacing the cutter, you must stop the machine and use the clamp bolt to change the cutter. After installation, you must manually swing up and down to confirm the correctness, and then adjust the depth line of the cutting knife. You should first adjust the cutting knife higher, and then carefully adjust the depth of the delicious ruler from shallow to deep, and then tighten the safety screw to use.
        6. Equipment maintenance: the butter hole guide rails and other activities should be filled with butter at least once every half a month. The dirt on the surface of the machine must be wiped every day and the air debris and dust (including electrical boxes, motors, etc.) must be wiped off to clean up the garbage on the job. Keep equipment and posts clean.

        To achieve the above points, I believe that in the process of using the paper cutter, it can be more safe and reliable, and extend the service life of the paper cutter.