As for the paper cutter equipment, we may sometimes find that the paper cut by it is slightly inclined, and the product does not meet its production standards. So what are the reasons for this?
After our careful research, we found that in the paper cutter, the viscosity of the adhesive layer is relatively strong, so the resistance value to be overcome during the cutting process of the lower knife is relatively large, and it has just been cut. At the moment of cutting, the paper presser will rise slightly, which will cause its cutting to tilt. We continue to analyze this phenomenon. After a series of tests on the operating pressure of the paper press related to the solenoid valve, the purity of the circulating lubricant, and the hydraulic system, we found that the operating pressure of the paper press cylinder and the skills requirements of the machine will be between There is a certain gap; afterwards, we can take apart and check the paper pressure cylinder, and found that the compression spring in the oil cylinder has been broken into two sections, and its elastic pressure value will also decrease accordingly. After replacement, the operating pressure value of its pressure cylinder will return to its normal state, and the paper cut by the cutting machine will no longer tilt.
In fact, after using the tension spring in the paper cutter for a period of time, it will become tired and cracked, and the pressure value in the pressure cylinder will be reduced accordingly. It does not have any effect; and only when the viscosity of the sticker is relatively large at the same time, due to the increase of its resistance value, the corresponding cutting offset phenomenon will occur.
The paper cutter is a device for cutting into flat paper in the paper cutter industry. Divided into two types of blade cutters (single and double-knife) and flat-knife cutters. The blade cutter paper cutter includes a longitudinal cutting mechanism composed of an upper knife and a lower knife, a transverse cutting mechanism composed of a rotary long knife and a fixed bottom knife. It can cut 6 ~ 10 paper rolls at the same time. The flat-knife paper cutter is a gate knife that can be raised and lowered on the platform, and cuts a flat sheet of paper to a predetermined size. For cutting large sheets of paper into small paper.
Industrial paper cutter
Industrial paper cutters include manual cutters, electric cutters, CNC cutters, etc., which are mainly used for cutting industrial paper or other products.
Tip: If you need to find an industrial paper cutter, you should understand the product use as much as possible to facilitate the corresponding equipment manufacturer.
Paper cutter is a traditional product, which is used to deal with paper cutting needs in the post-printing period. From a mechanical paper cutter to a tape-controlled paper cutter, it has also developed to a microcomputer program control, color display, full-image operation guided visual processing, and a computer-assisted cutting external programming and editing production data cutting system to enable production preparation Shorter, higher cutting accuracy, lower labor intensity, and safer operation.
A paper cutter with high cutting performance, suitable for cutting labels, carbon paper, hardcover books, etc. Maoyuangao specializes in manufacturing high-speed hob roll paper cutters with high accuracy and fast speed.
From the driving mode of the pressing mechanism, it is divided into mechanical pressing and hydraulic pressing.
The hydraulic press method can more accurately ensure the same length tolerance accuracy (commonly known as the accuracy of the upper and lower knives) after the cutting of the cutting object, especially when the cutting density is large, the difference is particularly obvious. Therefore, with the emergence of hydraulic paper-pressing paper cutters, mechanical paper-pressing paper cutters are no longer selected by customers who require higher cutting accuracy.
The clutches of the paper pressing mechanism and the cutting mechanism are hydraulically driven and are also called full hydraulic or double hydraulic paper cutters. The full hydraulic or double hydraulic paper cutter has a larger cutting force, which has obvious advantages when cutting high-density cutting objects, the clutch is not easy to slip, and the clutch clearance does not need to be adjusted frequently.
Maoyuan paper cutter is a very commonly used equipment in the paper processing industry, which not only makes the past manual paper cutting operation to the current fully automatic program-controlled paper cutting. The huge changes that have gone through them are the efforts of many R & D personnel, which has also made China's paper processing industry develop rapidly.
We know that Maoyuan Paper Cutter is very dangerous during use. A little careless operation will cause injury or death to the staff. Fortunately, science and technology are currently developed. For such events, the paper processing industry has developed a new type of Maoyuan paper cutter equipment, which is the program-controlled digital display Maoyuan paper cutter. It is controlled directly from the program and also has a display. It can perform full-automatic paper cutting operations, which not only reduces labor input, but also guarantees the quality of paper processing.
Brief Introduction to Three Categories of Maoyuan Paper Cutter
The most important thing is that the design of this Maoyuan paper cutter is very user-friendly, and it will automatically crash when the hand is caught by the clamp. Multiple protection technologies make this device high in sales in the market.
On the other hand, the application of Maoyuan Paper Cutter in the paper processing industry can be said to be as good as water. Is an indispensable device in this industry.
First, the timely performance of the paper cutter:
Mainly manifested in the cutting precision of the paper cutting machine, precision retention, quality stability, ease of operation and safety.
Second, the gap between paper cutters at home and abroad
1. The control system is relatively backward and lacks automatic detection devices. In terms of control system, China has just started using PLC, while abroad has adopted a full line of computer control, using computer control, using the computer to monitor and adjust the various execution components, while presetting parameters, automatic adjustment under computer control, greatly Reduced assist time and guaranteed reliable operation.
2. Poor completeness. Domestic paper cutters are rarely equipped with peripheral equipment, that is, cutting production lines.
3. There is a certain gap in appearance and ease of use. Through the efforts of domestic paper cutter manufacturers in recent years, the gap between domestic paper cutters and foreign products is rapidly narrowing, and some technologies are even at the leading level. At present, the control methods of foreign paper cutters are basically controlled by color microcomputers. The digital display is the main type, and various mechanical paper cutters lacking safety protection exist in large quantities and are sold. Microcomputer-controlled paper cutters are the development trend of paper cutters, and they are replacing other control methods with large areas in a faster and larger area. paper.