1. Check each of the main components before starting each time, check whether there are any faults and potential safety hazards in the electrical, pneumatic and surrounding environment, remove the faults in time, eliminate the hidden dangers, always keep the equipment lubricated and clean, and pay attention to the operating conditions of the equipment at all times. Special safety equipment must be documented.
        2. Thoroughly clean the entire machine every week and conduct a comprehensive inspection of the electrical components of the entire equipment. Reduced equipment wear due to environmental issues.
        3. Sometimes simple cleaning cannot be thoroughly cleaned, so every hour or half a year, the operator should thoroughly clean the equipment and the surrounding environment, especially some sanitary corners that are not easy to clean.
        4. Mainly maintenance personnel, supplemented by operators, perform partial disassembly and cleaning, oil change and inspection of key precision items, replacement and repair of worn parts.
        5. Maintenance Carefully inspect all major and minor wiring and electrical units and components of the equipment, and check adjustment parameters.
        Today, paper bag production equipment plays a more important role in the entire packaging industry. Under new opportunities and challenges, the quality problem of paper bag machines is whether we can turn opportunities into good medicine for enterprise development. The domestic paper bag machine company will, as always, adhere to its own development goals, keep making progress, grasp every opportunity of market development, and produce the most reliable packaging equipment.

        The glued parts of the paper bag machine are located on the spine and sides. The hot-melt adhesives used are also different. For example, the two behave differently. The melting temperature is different. The quality of the glue and glue is suitable. Importantly, the high temperature of the melt will make the melt too thin and the viscosity insufficient. The high temperature of the melt will make the glue too thick to penetrate and flow, and some will adhere to the ridges or sides through small particles. The surface will wrinkle and empty the lid. It is worth mentioning that.
        At present, the performance of hot-melt adhesives produced by different manufacturers is not the same (we have practical experience). Take the hot-melt temperature of the hot-melt adhesive used in our factory as an example. Some glue temperatures are 120 ° C. The temperature is 135 ° C, some glues have a hot melt temperature of 180 ° C, and the spinal heat is 200 ° C.
        Therefore, according to the properties of the material, appropriate process parameters must be mastered to ensure the sizing quality. Generally, after sizing, the width of the side rubber cover is 4mm ~ 5mm, and the spine glue can penetrate and fill the milling groove. When the glue is uneven, the glue is too thin, and the covered paper bag machine is not replaced as required (or the height adjustment is appropriately adjusted), and the plastic bag behind the book is prone to hollow bulges and wrinkles. It must be controlled and inspected during the plastic bag process.
        The finishing work of the paper bag machine before the plastic bag is a process that cannot be ignored in the whole process of wireless binding. If the paper bag machine does not enter the plastic bag completely during the finishing process, various quality problems may occur after the plastic bag, such as peeling, loose pages, empty bulges, wrinkles, etc. Finishing is to bundle semi-finished book stickers, put a certain number of book stickers on the binding machine, quickly stop the plates at both ends, and start the binding machine to compact the loose book stickers, and then tie the rope. In order to make the compacted back hard and strong, after compacting and binding, apply polyethylene glue to the back of the binding book. After the PVA glue has dried, the cable tie will be loosened and then the rope will be loosened. Separate and transfer each part into a plastic bag.

        The paper tube crushing mechanism of an automatic food paper bag machine belongs to the technical field of packaging machinery. The utility model is characterized in that the disc is fixed on the disc by disconnection, the disc is arranged on the oblong shaft, the other end of the oblong shaft is fixedly connected to the motor, and the sheet is fixedly connected. The fixing plate is fixedly connected to the wall plate at both ends. The fracture shape is a strip shape of a metal plate, and the outer surface of the mouth has a rhombus shape. The shape of the disc is a metal dome with a round hole in the center.
        The sheet shape is a strip shape of a metal plate, and the mouth portion is jagged. This technology can process the entire formed board paper tube into a single paper tube. The machined paper tube is used in the lower layer process, with high control accuracy, fast speed, high efficiency, stability and reliability. .
        Bags produced by paper bag machine wholesalers have high precision and the sides of the bag are very flat. The chairman of the board of directors said: "Our equipment has a relatively large processing range and can be used as a relatively large bag. For making bread bags longer than 1 meter, it can process 30 grams in terms of paper grams. There is no similar device that can compete with us. "
        The automatic food paper bag machine completes the output from roll paper to folding, forming, cutting, gluing, folding bottom, paste bottom and finished bags. The operation is more convenient, more efficient and more stable. It is an ideal equipment for producing various paper shopping bags, snack food bags, bread bags, vomit bags, and dried fruit bags.

       Now for the use of paper bags, not only the food industry and some commodity sales industries. With the increasing demand for environmentally friendly packaging products, paper bag machine equipment has also shown a good development trend. For the entire packaging industry in China, paper bag Mach equipment The issue of distribution plays a more important role.
        We say that paper bags are now being used in more areas, so which areas are using or gradually using paper bags? The development of paper bag machines is very rapid. Now there are many types of paper bag machines, and their functions have been greatly improved. I believe that with the development of science and technology, the related technology of paper bag machines will get greater progress.
        For example, the cement paper bag machine is a new type of paper bag machine, which uses paper-plastic composite material and has a relatively large volume. This machine adopts imported servo synchronous transmission system and has good press configuration. It is now used in many industries and has very good features. The paper bag machine can process 60 to 180 grams of composite material and then produce different composite bags in folded and printed form. It can be used for machine sewing and manual folding. The printed paper bag is connected, which can solve some problems after printing.
        Paper bag packaging machine is widely used, it can also process some single-layer kraft paper bags, and can also produce some more complicated paper bags. The finished product success rate reaches 100%. In today's society, we have stronger requirements for environmental protection. This is something worth doing. The environmental protection performance of the kraft paper bag machine is more outstanding and has greater potential.

        We can all see a very good phenomenon, that people are more willing to use paper bags now, and changes in people's needs will definitely lead to the development of paper bag machinery enterprises, which is also a rare opportunity for our paper bag production enterprises. Facing the huge market demand, we will see the following points. How to do a good job in product promotion.
        In order to do a good job in the market, we must not only meet the needs of the market, but also develop our own unique products. We need to increase investment in equipment and technology, apply the "environmental protection card", lead the industry development with high-quality environmentally friendly products, and show that packaging companies do not forget society. Responsibility.
        Environmental protection has become an urgent issue, which represents the voice of most packaging companies. In the long-term practice of enterprise development, we have realized that in order to develop an enterprise, we must also save energy and resources, and we must have both economic and social benefits. This is not only conducive to environmental protection, but also beneficial to the long-term development of enterprises.
        The active market for paper bags is due to the demand for safer and more environmentally friendly packaging products. When more and more people know the dangers of plastic bags, the global low-carbon environmental storm has spread to the packaging industry, and the concept of low-carbon packaging has been proposed. The main content of low-carbon packaging is light packaging and transparent production. Clean, green products, energy saving and emission reduction, and replacing wood with paper are the core of low carbon packaging. We advocate green packaging, so we must do a good job of recycling waste paper. This can reduce the amount of wood, cut down trees, and protect the ecological environment. At the same time, it is more in line with the characteristics of paper, such as green packaging.
        We must first seize the active domestic market. With the continuous growth of China's economy, the packaging industry will maintain rapid growth, driving the development of manufacturing. Faced with such a demand, we must clarify our own strengths and weaknesses, make up for our own weaknesses, and start from ourselves to gradually push our goals to a wider international market. This is our gradual requirement.