Paper cutters are widely used in the light industry to cut various papers, plastic films, leather and other similar soft materials. Usually the paper cutter adopts the relay logic control mode, with many components, large equipment and low reliability. We have adopted a programmable controller to technically reform the paper cutter and achieved satisfactory results.
        With the development of enterprises and the intensification of competition in the printing industry, many small and medium-sized printing companies that used to only print a single product or a few fixed products have to expand their business scope. According to market needs, they are engaged in small batches and multiple varieties. Product printing. The diversification of products, especially the printing of trademarks, requires high dimensional accuracy, large cutting volume, and tight delivery time, which places high requirements on cutting equipment.

Paper cutter operation process:
1. The operation process of the paper cutter manufacturer should check the machine before starting up, do a good job of cleaning, add oil or butter, try the empty knife three times, and observe whether there is a return knife. If a problem is found, it should be eliminated in time. During the process, if you find a return knife, you should park your car immediately and repair it in time.
2. When working, you must concentrate, and it is strictly forbidden for two people to operate at the same time.
3. When the machine is running, it is strictly forbidden to put your hand into the machine. If a fault occurs, it is strictly forbidden to grab the paper by hand, and you should stop the machine immediately.
4. When the operation process of the cutter manufacturer is adjusted and the cutter is replaced, it must be stopped. Even when the machine is stopped, it is strictly forbidden to put your hand under the knife to change the knife. You should use long-handle bolts and other tools to change the knife. You must remove it during the test to avoid accidentally injuring the operator when the machine is started.
5. The machine must be cut off when adjusting the machine, changing the blade, and when repairing, refueling, scrubbing and inspecting the equipment.

        The operation of the paper cutter is relatively simple, and the requirements on the environment are not high. Usually in the general office, the power supply can be used to ensure power supply to work. Generally, the paper cutter has an automatic switch system. As long as the old paper is lost during the input, the paper cutter will automatically rotate to shred the paper. Some paper cutters need to press the start button once, and the cutter will rotate to continue cutting. After shredding, press the stop / reverse key to stop the cutter from rotating.
        Before shredding paper, you should check whether there are hard objects such as paper clips and staples on the documents to be shredded. If there is, it should be removed and put into the paper port, otherwise the cutter may be damaged. When using the paper cutter, be careful not to jam too much paper at a time, especially paper of better quality, and pay more attention when using it, so as to avoid paper jams. Try not to skew the paper when loading it The paper should be placed in the center of the paper inlet as much as possible.

Paper-cutting machinery is composed of household paper-cutting machines and industrial paper-cutting machines. There are many kinds of paper cutting machines with different degrees of automation.
Daily use tissue paper cutters include toilet paper cutters, napkin paper cutters, paper cutters, square paper cutters, tray paper cutters, paper towel cutters, facial tissue paper cutters, etc. Mechanical composition. According to different paper products, the corresponding paper cutting machinery is different. Toilet paper cutters refer more to band saws, that is, band saw cutters used to cut toilet paper rolls. The band sawing and cutting machine is equipped with automatic knife sharpening and movable table device, which can cut into the required rolled paper products according to the required length and width.
Industrial use Industrial paper cutters include manual paper cutters, electric paper cutters, numerically controlled paper cutters, etc., which are mainly used for cutting industrial paper or other products.

The cutter's optimized heavy-duty frame design, precision machining, stable performance, and durability; the cutter uses new high-integration and high-stability components, and the original electronic knife position indicator line to ensure the reliable operation of the cutter; touch key panel , Two-hand interlocking device, automatic reset function to ensure absolute safety.
Using high-speed steel blade, sharp and durable; unique fault self-detection function, make your operation more handy.