Paper cutter operation process:
1. The operation process of the paper cutter manufacturer should check the machine before starting up, do a good job of cleaning, add oil or butter, try the empty knife three times, and observe whether there is a return knife. If a problem is found, it should be eliminated in time. During the process, if you find a return knife, you should park your car immediately and repair it in time.
2. When working, you must concentrate, and it is strictly forbidden for two people to operate at the same time.
3. When the machine is running, it is strictly forbidden to put your hand into the machine. If a fault occurs, it is strictly forbidden to grab the paper by hand, and you should stop the machine immediately.
4. When the operation process of the cutter manufacturer is adjusted and the cutter is replaced, it must be stopped. Even when the machine is stopped, it is strictly forbidden to put your hand under the knife to change the knife. You should use long-handle bolts and other tools to change the knife. You must remove it during the test to avoid accidentally injuring the operator when the machine is started.

5. The machine must be cut off when adjusting the machine, changing the blade, and when repairing, refueling, scrubbing and inspecting the equipment.