The high-speed slitting machine needs to be checked regularly, otherwise it is prone to failure, so what should we do when the failure occurs?
        1. Insufficient winding tension-disposal method: when the voltage of the upper and lower tension controllers controlling the magnetic powder clutch is adjusted to a high level, the winding tension is still not enough, the winding film material is lax, and the winding shaft can be caught by hand Stop the bomb. Clarified that the output torque of the magnetic powder clutch is not good, and the magnetic powder in the meantime is reduced or invalid due to the longer time. The manufacturer of the slitter introduces it at this time. .
         2. The photoelectric tracking is inaccurate during slitting-disposal method:
        (1) The photoelectric eye adjustment method and homework situation selection are not accurate, and should be adjusted from the beginning according to the requirements of the statement;

        (2) The color difference between the traced line or edge and the nearby film material is not significant, and the color difference contrast should be increased.