The work of the paper slitter cannot be smooth all the time, it will always have some small problems, so what are the problems?
        1. The trend of slitting and rewinding materials
        This is mainly because the winding tension is not enough, adjust the appropriate winding tension of the paper slitter, use a pressing roller for winding, and enter the winding paper core after wrapping the slitting material through the pressing roller.
        2. Uneven winding of slitting machine
       In this case, most of them are due to the unsuitability of the paper core, as long as the paper core that meets the required inner diameter is replaced. In addition, during the winding process, the winding roller should also be used to avoid uneven winding. problem.
        3. Meter counting is not allowed
        If you encounter this kind of problem, you can touch the double wheel of the metering wheel at the same time to the feeding rubber roller, and make a mark on the metering wheel and crank it 5 times to count 1 meter. Otherwise, replace the metering.

        The above three are the problems that are easy to occur in the paper slitter. I believe everyone already knows it.