In our lives, there are often materials that need to be cut, and at this time, the appearance of a high-speed cutting machine is needed. Let's understand the cutting method of high-speed cutting machine and the choice of cutting tools.
        Cutting method:
        1. Cutting: the cutter is fed vertically, and the wide-width coil is cut into multiple rolls of narrow specifications;
        2. Double speed feed: refers to cutting the material by cutting the material or tool in opposite speed.
        3. Bevel cutting: according to the demand of material feeding, adjust the cutting direction of the cutting tool so that the cutting direction is not completely perpendicular to the material curling diameter;
        4. Single speed feed: it means that the material or tool can be fed at any station speed, and the other station can keep the feed.
        Tool selection:
        1. Tungsten steel knife, which has good brittleness and sharpness, and is generally used for cutting soft materials such as double-sided tape. The cutting precision of the cutter is good, and there are few burrs and silk edges in the cutting process. However, this tool is prone to chipping for harder materials. In addition, the cost of knives is relatively expensive. Generally, manufacturers only use materials with relatively soft texture such as tape, PE film, and masking paper.
        2. White steel knife, also known as high-speed steel knife. This kind of cutter has good toughness and high cutting efficiency, but the cutting sharpness is not good. Generally using this kind of cutter, it is necessary to adjust the speed properly to make up for the unsharpness that may be caused during the cutting process. This kind of blade is mainly used for cutting high hardness materials such as PET material and PE material. The price is relatively cheap, more practical, is a common tool.

        All in all, the high-speed cutting machine has become an inseparable equipment in our lives.