What are the advantages of slitting machine manufacturers? What are the characteristics of the slitter?
        The central part of the paper tube slitter is equipped with a main shaft for processing paper tubes. The front end of the main shaft is fixed on the base with a set of bearings, and a pulley is installed in the middle of the set of bearings. A set of support rod bearings is installed at the upper end of the rod to support the main shaft.
        The main knife shaft is installed on the upper end of the paper tube slitter, and a number of blades are arranged on it, and arranged according to a certain gap; the support frame of the main knife axis is also provided on the top of the paper tube slitter. A supporting cylinder is installed in the middle.
        The structural advantages of the paper tube cutting machine fill the technical gap of the automatic tube cutting machine.
        Slitting machine features
        1. Simple operation control panel: each part of the machine is controlled and centralized panel operation.
        2. Three-segment length setting: advanced three-segment searching and counting, to ensure accurate winding length.
        3. Automatic shaft exchange: After the winding operation is completed, the two shafts are automatically exchanged, which is easy to operate and high in efficiency.
        4. Labeling instruction: Automatically stop after reaching the labeling length, and attach the label mark of the indicating film opening on the platform.

        5. Rear feeding method: feeding from the rear side of the operation surface, with a rubber pressing wheel to reduce the noise of the peeling tape, and smooth feeding.