Paper bag machine equipment needs to be maintained and inspected in time after use. In use, it is necessary to pay attention to its use conditions, temperature requirements, and paper bag machine equipment needs to pay attention to the problem of deviation in the process of use. Now Xiaobian will introduce to you the common problems and reasons during the production of paper bag machine equipment.
        After the rapid development of the paper bag machine equipment in recent years, the equipment technology and the convenience of operation have been greatly improved, but there are still some issues that need attention, only when we are more familiar with the machine , We can better use the paper bag machine equipment for production, so that we will introduce several problems in the production process of kraft paper bag machine equipment.
        The production process of paper bags includes several steps such as feeding, production, and finishing, as well as related pre and post processes, such as cleaning, stacking, and disassembly. In addition, packaging also includes metering or stamping on packages. The use of mechanical packaging products can increase productivity, reduce labor intensity, meet the needs of large-scale production, and meet the requirements of cleanliness and hygiene.
       1. What is the reason why the shrinking machine heats up slowly or cannot rise to a higher temperature (above 160 degrees Celsius)?
        The circuit of the heater is that the main power line passes through a magnetic switch and then to the electric heating tube, so you should first check whether the contacts of the magnetic switch are normal. If the line does not pass through one of the phases, the above phenomenon will occur. If the magnetic switch is normal, check the meter again to see if the phase and the ohmic value of the machine are the same. If normal, it should be a short circuit. If all phases are connected but the line or electric heating tube is still abnormal, the heater needs to be replaced.
        2. How to adjust the film material when the equipment is easy to shift during normal operation?
        In the case of film deviation in the equipment, after adjusting the film roll position and the tension balance bar are invalid, the problem can be solved by adjusting the angle of the upper triangle plate. If the upper film material deviates from the clamping chain, the upper triangle plate can be adjusted clockwise; if the lower film material deviates from the clamping chain, the upper triangle plate can be adjusted counterclockwise.
        3. When packing 6 bottles, the electric eye cannot detect the package, and it is easy to cut the package when the machine is working. How to adjust it?
        The gap between the bottles of the cluster package will affect the detection of the electric eye. At this time, the horizontal electric eye detection angle can be adjusted to an oblique angle.

        We must be more familiar with these issues. Only in this way can our enterprise's production be stable.