The blade of the paper tube machine adopts imported single circular knife cutting design, and the fully CNC-driven cutter (not cylinder drive) realizes accurate cutting. The ultra-quiet design of the transmission part of the paper tube machine improves the work efficiency! When we use supervisor-level operation, we must pay attention to that the tool must be adjusted before cutting, the work must be clamped, and the parking stop must also be fixed. By clamping and loosening, run forward and backward, etc. After that, it can work if the machine tool is rotating.
        No part of the human body can contact the rotating parts, and the cuffs must be tied during operation. This can prevent the pipe from rolling, impacting and crushing people. You need to check that the dust removal device is intact, so that you can For cutting, when using a wheel cutting machine, check in advance whether there are any defects or cracks on the wheel, whether it is damp, and whether the power cord is reliable. Change the tool, measure the workpiece, and lubricate and clean the pipe head. It must be stopped. Time to proceed.

        The maintenance of the paper tube machine is also very important. 1. When the paper tube machine starts to work, we should reduce the speed or directly adjust it to the lowest point. This avoids mechanical losses. 2. After the paper tube machine has a problem, you should cut off the power as soon as possible to find a professional to repair it. Do not repair it by yourself, let alone repair it when it is connected to the power. This will cause the risk of electric shock. 3. The power supply should adopt a three-phase four-wire system to avoid danger. In fact, there are many precautions during the entire operation. When working, the most important thing is to be careful.