The paper slitting machine is composed of a frame, a transmission system, a receiving and discharging machine, a tension control device, a traction member, a slitting bracket, a waste winding and a discharge device.
First, the paper slitter frame and the transmission system: the paper slitter frame consists of the left and right wall panels and the support and the discharge mechanism. The transmission system is mainly used to pull raw materials and wind up the finished product. It is driven by the variable frequency stepless speed regulating motor through the motor V-belt to drive the traction roller. The main traction rubber roller and the driven traction roller are in close contact with each other. The traction material is driven, and the lower circular cutter shaft is synchronously operated by the active traction roller to achieve better cutting requirements. The lower circular cutter shaft drives the winding A and the winding B to perform synchronous operation, thereby achieving the purpose of receiving the material.
Second, the receiving mechanism and its tension device: the receiving mechanism of the paper slitting machine mainly consists of a chain, a synchronous wheel, a magnetic powder clutch, and an air-expansion shaft. The two reels are controlled by a single motor, as long as By adjusting the current of the magnetic powder clutch, the tension of the receiving shaft can be changed.
Third, the traction member: the traction member of the paper slitting machine mainly comprises a pair of traction rubber rollers and a plurality of hard oxidized aluminum rollers, which are used for taking the raw materials for the winding of the finished product. The power is derived from the motor passing. The V-belt is transferred to the active traction roller for operation.
Fourth, the slitting knife holder: the slitting knife holder of the paper slitting machine has a circular knife slitting and a straight knife slitting. The operating handle can make the circular knife make a slight axial movement to adjust the round knife edge and the pad through the plane cam. The shear gap of the groove.
Fifth, waste rewinding and discharge: The waste is discharged through the wind pipe using the wind of the blower.
Sixth, the discharging mechanism and the automatic deviation correction: the discharging mechanism mainly comprises a discharging shaft, a supporting block, a cylinder, a base, a left and right moving seat, and the like, and an automatic correcting device is provided: a photoelectric starting, a correcting guide roller, a left and right bracket, and a correcting moving plate. Ball nut and screw, synchronous motor and left and right limit switches.
The paper slitting machine divides the raw materials into several independent units. The working principle is to fix the raw materials on the end of the discharging shaft, and the magnetic powder tension controller is used to constant the tension required by the raw materials, and then pass through a pair of rubber rollers. To pull the raw materials and cut them into several pieces through the blade. Then, the guide rollers are guided to the A and B winding reels to wind up the finished product.

The transmission of the paper slitting machine is driven by the main motor to drive the rubber roller and the receiving shaft to operate synchronously to achieve the purpose of pulling the material and receiving the finished product.