At present, the product variety of paper tube machine is more and more diversified, and the use is more and more extensive. It is not only environmentally friendly, but also energy-saving. With the widespread use of paper tube machinery, its proper installation has been mentioned on the agenda. The machine can only operate normally after being properly installed and debugged. The installation steps of paper tube machinery are mainly divided into three stages: paper tube machine technical preparation, paper tube machine organization preparation, and paper and paper tube glue supply work preparation.
        Here I will specifically talk about the technical preparation of the paper tube machine. ① Paper tube equipment cleaning. After the equipment is unpacked and inspected and disassembled, the anti-rust agent applied and the internal iron scraps, rust and dust accumulated during transportation and storage must be removed and cleaned before assembly. ② Paper tube equipment is lubricated. After the internal and external parts of the equipment are cleaned, lubrication can be performed. Lubricants must be tested and determined to meet the requirements before they can be used. The lubricating oil must be filtered before adding the equipment, and the added oil should reach the specified oil standard position; all lubricating parts and oil holes should be filled with lubricating oil.
        Check whether the cleanliness of the paper tube machine equipment and its working environment meets the working requirements. When we receive a new paper tube machine, we should unpack it for closer inspection. After disassembling the outer packaging, please pay attention to check it again, and then make sure that there is no problem before cleaning. We first clean up the anti-rust agent coated on the surface of the equipment and the internal debris such as iron filings, rust, and dust accumulated during transportation.

        When adding grease, you need to pay attention to controlling the amount of oil, not too much, not too little. Otherwise it will affect the working condition of the paper tube machinery. When you have done this and need to turn on the power, you should ensure that the electricity is safe. After turning on the power, it is better to test run for a period of time. During this period, pay attention to observe the operation of the equipment.