Do you know the structure of the automatic paper tube machine when the manufacturer designs it? If you do n’t know, it ’s best to understand this. It will give you a better understanding of the automatic paper tube machine and it will also make you feel more comfortable when using the automatic paper tube machine. It will also let you know the advantages of the automatic paper tube machine. . The following editors introduce the design structure of the automatic paper tube machine for you:
        1.Feeding structure
        During the feeding process, if it stops at the feeding roller 8, the swing mechanism at this time will swing backward, which will make the feeding roller continuously feed the paper tightly and also prevent the feeding of the material when the automatic paper tube machine is running. The situation of partial deviation occurred. You can let the swing mechanism spring to swing forward when the roller feeds. This will allow continuous feeding of the roller in the automatic paper tube machine. However, this part is the most important part and should not be damaged. If it happens, it will stop because of the damage of this part.
        2.Reciprocating structure
        This structure is that when the sprocket is turned clockwise from the position specified by the manufacturer, the chain will start to move and the outer sleeve will be driven by the card seat, and the bent plate bracket will be driven by the bearing and the slide bar. Later, the entire reciprocating structure was moved to the right. If the card holder moves to the point of contact between the front wheel and the chain, the outer sleeve will rotate inside the card holder to rotate. If you want to stop, the slide bar and straight line at this time. The bearings will slide relative to each other, and the reciprocating structure will start to decelerate. If this is the bracket, the speed of the bracket will be reduced to 0 when the right quadrant point of the driven wheel is reduced, and the reciprocating structure will start to act like left and accelerate. .

        Because the automatic paper tube machine has the characteristics of fast speed and automation, each module needs to coordinate with each other before it can run correctly. The general relationship is that the cutter action will be performed immediately after the feeding structure is completed, etc. This coordination and matching is very important. If an error occurs, the operation of the automatic paper tube machine will be normal or the equipment will be damaged. In the automatic paper tube machine, the feed mechanism and the cutter's motion are determined by the world. Incomplete gears and the shape of the cam below the cutter determine the priority time.