Working principle of pipe cutting machine:
        The pipe cutting machine is a kind of paper pipe machine. Its principle is that through the cooperation of computer and hydraulic pressure, the electrical system controls the oil circuit movement direction of the hydraulic system and pushes the carriage for linear reciprocating motion. The microcomputer will walk according to the self-programmed cutting path. During the reciprocating motion, the signal detected from the carriage limit will be used as a basis to control and modify its oil path movement to reach the expected cutting path. When buying a pipe cutting machine, you should also understand its usefulness: This machine tool is generally used for the automatic pipe opening of stainless steel pipe cutting and chamfering in the handle industry. Stainless steel pipes and seamless steel pipes with a length of ∮25 or less and a length of 6 meters can be placed. For the processes of automatic feeding, cutting and chamfering, one person manages multiple machines, reducing labor intensity and saving personnel.
        The automatic pipe cutting machine can automatically clamp, feed, feed, size setting, fixed number of shutdowns and work measurement functions. The main circuit of the machine works with a PLC programmable logic controller. Automatic feeding, clamping and cutting system, accurate and fast feeding, can cut 10-50 times per minute. The counter can set the number of cuts, and it will automatically stop after the cut. The complete one does not require manual operation, higher mechatronics, and even one person can operate multiple units, reducing staff. The total counter can count the workload record of a day. The total pressure, front, back, and pressure can be adjusted steplessly to ensure that the workpiece is not pinched and deformed. The servo pipe cutter is used to ensure the accuracy of the pipe cutting length is within plus or minus 0.05mm (the error is mainly generated on the steel pipe and the tool) ), The cut is shiny without burrs.