In the use of program-controlled paper cutters, safety issues are very important. Safety and operation habits are directly linked. Therefore, reasonable safe operating practices are very important. Let us focus on understanding the specifications of program-controlled paper cutters' safe operation.
1. When the equipment is turned on, mechanical inspection should be performed and safety inspections done, such as daily cleaning and refueling of oil holes.
2. After doing the above measures, when inspecting the photoelectric measures of the equipment, multiple operations should be performed to observe whether it is normal, and if abnormality is found, it should be eliminated immediately.
3. When operating a program-controlled paper cutter, you should work with all your heart and mind. Do not do anything unrelated to your job, so as not to distract you and increase the risk factor. Of course, two people are also prohibited from operating the equipment at the same time.
4. Don't put your hand into the machine during the operation of the equipment. If you can't use your hand to correct the fault, you must stop the machine first.
5. When using the equipment to cut paper, do not perform ultra-high operations to avoid accidents or operating loads.
6. When replacing the paper cutter of the equipment, it must first be stopped before it can be replaced.
7. In terms of equipment maintenance, it is sufficient to refuel and clean up the oil holes.

The above is the safe operation specification of the program-controlled paper cutter. In order to ensure the safety of everyone in the operation of the equipment, every operator should observe it.