In a program-controlled paper cutter, the most important thing in determining the quality of the product it cuts is its blade. Below we analyze several common faults of the blade in the program-controlled paper cutter.
        If the blade of the program-controlled paper cutting machine cannot cut to the end, it may be caused by the poor straightness of the blade edge; its blade does not touch any hard things during normal use, but However, the cutting edge of the cutting edge is mainly because the cutting edge of the cutting edge has not been properly grasped during the cutting process, or the cutting edge is too large, which causes its temperature to be too high and burns its cutting edge; If the blade has just been worn, but there is still a poor cutting phenomenon, it is mostly because the blade is too soft due to overheating.

        Summarizing the above points, the role of the blade in the program-controlled paper cutting machine is very important. Of course, these blade-related failure analysis is not limited to the program-controlled paper cutting machine. For computer paper machines, hydraulic paper machines, and other types of cutting The same applies in paper machines.