I. Preparation of the paper cutter before operation:
        1. The operator must tie the hem and corners of the clothes, tie up the cuffs, and ensure that the items in the pockets of the clothes are empty. Never wear hanging ornaments to operate the machine;
        2. The operator must be in a good mental state, and it is strictly forbidden to work under excessive fatigue. Drinking or working under the influence of illness;
        3. Clean up the sundries around the paper cutter, place the material to be cut in a suitable position, and check whether any tools are left on the machine;
        4. After the machine is turned on, first check whether the switch is normal. Reliable, whether the cutter is sharp, try the knife three more times, and observe whether there is a knife return. If problems are found, it should be eliminated in time; Whether it malfunctions, etc., to ensure that the machine runs in a zero-fault state.
        2. Safety precautions in paper cutter operation
        1. Before starting, the operator must remind the companion or other personnel to pay attention to safety, and confirm that there is no danger before starting.
        2. Before starting the machine, you must pay attention to the surrounding environment and whether anyone is doing other work on the machine;
        3. During the cutting process, other personnel must not touch the switch in order to avoid misoperation of the machine;
        4. When the machine is running, the mind must be concentrated, and it is strictly forbidden to do anything unrelated to the job to avoid distracting energy. Paper cutter is prohibited to operate by two people at the same time;
        5. Before cutting, the operator must check whether the paper cutter is normal or not, and then try to cut a few knives to confirm that the machine's performance is normal before continuing the operation;
        6. During the operation of the machine, the operator should closely monitor whether the machine is in a normal state. When there are abnormal sounds, such as not dropping the knife, etc., the operation must be stopped immediately, and the relevant personnel must be reported to identify the fault. Boot operation
        7. When the machine is running, it is strictly forbidden to put your hand into the machine. If a failure occurs, it is strictly forbidden to grab the paper by hand and stop immediately. When the paper cutter does not return to a stable position, it is strictly prohibited to reach out to take the paper to prevent injury to your hand or accident;
        8. Operators are not allowed to join posts, get off the job and give it to others at will. If you need to leave the machine for any reason, you must turn off the machine and cut off the power before leaving.
        9. When the blade of the blade is blunt, the blade should be replaced immediately. Do not continue to use it to avoid damage to the machine due to excessive load
        10. It is forbidden to cut metal, hard objects and fragile materials;
        11. Do not place any non-paper tools on the operating platform. Computers, rulers, etc. should be placed at designated locations;

        12. The machine can only be operated by trained and qualified personnel, other personnel must not operate the machine, otherwise it will easily cause serious accidents.