As carton packs gradually replace the trend of plastic packaging. High-speed, high-precision automatic die-cutting machines are favored by users. In the fully automatic die-cutting machine, the motion and dynamic characteristics of the paper feed mechanism directly affect the quality of the whole machine. The common problems are as follows:
         First, the automatic die cutting machine layout pressure is uneven
         Fully automatic die-cutting machine layout pressure, this adjustment will just show the problem of unlubricated, fluffing and blasting of the cutting edge during die cutting. For the pressure adjustment of the layout, it is necessary to gradually pressurize from small to large. It should be small and should not be large. To make the pressures accepted by each layout common, if you want to get the pressure of ambition, you should press the proofs to check and then make adjustments.
         Second, the automatic die cutting machine's die cutting accuracy is not high
         The die-cutting blade of the fully automatic die-cutting machine is also a major factor, and the problem caused by it is that the die-cutting precision is not high, and the cutting edge is not lubricated and fluffed during die cutting. Die-cutting knives must select the best products of the appropriate type and standard to prevent the occurrence of various situations in the future.
         Third, the automatic die-cutting machine has been stuck in the strip
         The strips form die-cut strips and pastes that affect speed and quality. There are also tips for the strips when selecting. The low hardness is selected on both sides of the inlay line. The height of the strip is 2 mm. The narrow local hardness is higher than the blade 0.5 mm.
         Fourth, automatic die-cutting machine is prone to indentation lines and irregularities

         Indentation lines In order to prevent the occurrence of irregularities in the indentation line, an excellent indentation line is used. Moderate hardness and stability, wire lubrication is necessary, and then you should choose the appropriate height, thickness, and standard.