In most program-controlled paper cutters, the blade determines the cutting effect of the paper. Once the blade fails, it becomes a big problem for a program-controlled cutter. So let's explore the cause of the blade failure of the program-controlled paper cutter today.
        1. The blade cannot reach the end: This situation may usually be caused by the poor straightness of the blade edge.
        2. In the normal operation of the program-controlled paper cutter, the blade collapses before the blade touches the article: This situation is generally due to the excessive amount of the blade entering, which causes the temperature to be too high and the blade to be burned; There is also some debris on the cutting edge.

        From the summary of the above two points, it can be seen that the blade is very important for the program-controlled paper cutter. Therefore, it is often necessary to maintain or replace the blades in the daily use of the program-controlled paper cutter, so as to make the cut product neat and cut faster. These problems are not only applicable to program-controlled paper cutters, but also common in digital display paper cutters and computer paper cutters.