In the process of bag making, the plastic bag making machine has different lengths of finished plastic bags, sometimes long and sometimes short. If this is the case, then it will definitely not work, but how can we solve this situation? What is the cause of this phenomenon? The following is a detailed analysis by Xiaobian and everyone.
1. There is a lot of dust on the photoelectric head of the plastic bag making machine. When the dust on the photoelectric controller is too much, it will affect the luminosity and intensity of the laser, so that the length of the plastic cannot be accurately controlled.
2. The problem of the photoelectric head equipment of the plastic bag making machine. Because some manufacturers' bag making machine quality can not be guaranteed, the use of inferior photoelectric head accessories, resulting in sensitive substandard, the solution is to replace the photoelectric head.
3. The speed of the plastic bag making machine is too high. Make some accessories can not be more rhythm, you should reduce the speed to test.
4. The process of longitudinally sealing the knife to roll the cloth. Increased feed pressure.

5. The feeding and pressing devices of the plastic bag making machine are not synchronized. The feeding is too fast, too slow or too tight, and the pressing device is too loose. This phenomenon occurs when the length of the plastic bag is different.