How to solve the problem of automatic cutting machine? The automatic slitting machine equipment plays a very important role in the paper processing industry. In the process of use, it is inevitable that failure will occur, which will cause certain obstacles to the production process, and the manufacturer will also suffer losses. If the staff pays close attention to routine maintenance, there is generally no problem. Let us talk about the following problems in the case of Ruian Maoyuan Machinery.
       Common troubleshooting methods for automatic slitting machine:
       1. The automatic slitting machine is not well-rolled, most of which is because the paper core is not suitable. It is only necessary to replace the paper core that meets the required inner diameter. In addition, during the winding process, the winding roller should also be used. Can avoid the problem of uneven winding.
        2. If the meter is not accurate, if you encounter such a problem, you can touch the feeding roller at the same time with the two wheels of the meter wheel, and make a mark on the meter wheel for 5 times to count 1 meter or replace the meter. .
        3. When the semi-finished product is slack in the middle, this is closely related to the unevenness of the gluing and the unevenness of the substrate. At this time, the bow roller should be adjusted to flatten it, or the tension of the reeling roller is increased, and the substrate is compacted by a knife tube.
        4. The semi-finished product generates wrinkles during winding, and the pressure of the tension cylinder can be appropriately increased.

        5. When the finished product is wound, the tension of the take-up shaft is too tight, or it is closely related to the glue when the glue is applied.