After several years of rapid development, the current paper bag machine equipment has been greatly improved in terms of equipment technology and operation convenience, but there are still some problems that need to be paid attention to, only when we are more familiar with the machine , We can better use the paper bag machine equipment for production, so below we will introduce several problems in the production process of the kraft paper bag machine equipment.
        The production process of paper bags includes several steps such as feeding, production, and finishing, as well as related pre- and post-processes, such as cleaning, stacking and disassembly. In addition, packaging also includes processes such as metering or stamping on the package. The use of mechanical packaging products can increase productivity, reduce labor intensity, adapt to the needs of large-scale production, and meet the requirements of sanitation.
        1. What is the reason why the shrinking machine heats up slowly or cannot rise to a higher temperature (above 160 degrees Celsius)?
        The heater circuit is that the main power line passes through a magnetic switch and then to the electric heating tube, so first check whether the contacts of the magnetic switch are normal. If the line does not pass through one of the phases, the above phenomenon will occur. If the magnetic switch is normal, check the meter again to see if the ohmic value of each phase is the same as that of the machine. If it is normal, it should be a short circuit. If all phases are connected but the circuit or electric heating tube is still abnormal, the heater needs to be replaced.
        2. How to adjust the film material when the equipment is working and cannot be fed normally?
        In the case of film material deviation in the equipment, the adjustment of the film roll position and the tension balance bar are invalid, the problem can be solved by adjusting the angle of the upper triangular plate. If the upper film material deviates from the clamping chain, the upper triangular plate can be adjusted clockwise; the lower film material deviates from the clamping chain, and the upper triangular plate can be adjusted counterclockwise.
        3. When packing 6 bottles in a cluster package, the electric eye cannot detect the package, and the package is easy to cut when the machine is working. How to adjust?

        The gap between each bottle body of the cluster package will affect the detection of the electric eye. At this time, the detection angle of the horizontal electric eye can be adjusted to an oblique angle. We have to be more familiar with these issues. Only in this way can our company's production be stable.