Problems and solutions of fabric wrinkle of automatic laminating machine:
1. Check whether the unwinding and unwinding rods bounce during the normal operation. Cause: If there is a bounce, the unwinding of the unwinding motor and the unwinding rod will cause different tensions at both ends.
2. Carefully check whether the front and back ends of the cloth are aligned
3. Check whether the cloth-dispensing motor is running normally Cause: If the cloth-discharging motor does not rotate, it will cause the cloth to be slack and easily wrinkled
4. The print head installation is not parallel
5. The fabric is too thin Caused by: the fabric is too thin, the fabric is easily deformed under a certain tension

In the case that the colored paper for mounting and printing is thin and curled, the speed of the machine should not be too fast. When loading the paper and corrugated board, the relative positions of them should be aligned to avoid deviation errors due to the paper positioning. , Resulting in inaccurate lateral lamination, in order to ensure the accurate placement of facial paper and corrugated cardboard, the production speed of the laminating machine should be reasonably controlled according to the characteristics of facial paper; the relative position of facial paper and corrugated cardboard should be aligned The travel of the upper and lower chains must be accurate; after the upper and lower papers are aligned, the paper stopper of the stacking table should be fixed.