principle:
        First, the paper slitting machine should carry out the fixed length slitting processing of the whole roll or the whole raw material, such as plastic packaging materials, packaging cartons, steel plates, film, leather, wood chips, etc. Cut control.
        Second, the slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.

        Third, the slitting control of the paper slitter is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, The slitting signal is sent out without stopping the machine, and the slitting machine dynamically cuts the machining during the movement of the material.

Structural advantages:
        The middle of the paper slitting machine is equipped with a spindle for processing a paper tube. The front end of the spindle is fixed on the base by a set of bearings, and a pulley is installed in the middle of a set of bearings; a compression cylinder is mounted at a position close to the base, and a support rod of the cylinder is installed. The upper end is fitted with a set of support rod bearings to support the main shaft.
        A main cutter shaft is mounted on the upper end of the paper slitting machine, and a plurality of blades are arranged thereon and arranged according to a certain gap; a support frame of the main cutter shaft which is further disposed at the top of the paper slitter is installed in the middle of the support frame There are supporting cylinders.
        The structural advantages of the paper slitting machine fill the gap in the technology of automatic pipe cutting machine.