News

You are here: Home » News

Trouble shooting and temperature detection control of small laminating machine

  • Publish Time: 2020-07-08
  • Visit: 481
        1. Trouble shooting of small laminating machine
        Now when we operate a small laminating machine, we often see some cases where the machine cannot be started. Then, at this time, we need to test the entire power supply. First, we need to see whether the power supply is connected. If the connection is not good, then it is impossible to start. In addition, when we check whether the power supply is connected, we also need to pay attention to our power cable connection error. This is also a problem that many people often encounter, but, All of them appear at the first startup. If the situation does not start after a long time of use, then this problem will generally not appear. Finally, when the small laminating machine cannot start, we need to detect whether the voltage of the power supply is enough, because the small laminating machine is a machine with relatively large power consumption, and there are certain requirements for the voltage in the process of use. So we need to safely check whether the voltage meets the standard.
        2. Temperature control of small laminating machine
        In the working process of small laminating machines, it is often the case that the temperature detection is inaccurate, that is to say, we will have some work failures due to temperature errors during the operation, and the high and low temperatures will affect our Normal use makes our entire work in trouble. Therefore, we need to strictly check whether the temperature controller has a fault when the temperature is inaccurate. Once a fault occurs, it needs to be repaired in time, so that we can use it. More relaxed.

        The common troubleshooting of small laminating machine is introduced here for everyone, I hope to help you.

Previous:
Classification and processing technology of thermal laminating machine
Next:
The pre-coating film is the advantage and visibility function of the coating process