1. When the machine of the small laminating machine is running, prevent fingers from entering the two rollers to avoid sticking hands. The temperature of the pressing roller of the machine is high. Do not touch with your hands to avoid burns. The machine should be turned on at a low speed when scrubbing the machine. To prevent the cloth in the hands of the two rollers from being crushed.
2. Glue, thinner, and washing machine are flammable. Pay attention to the fire hazard around the machine.
3. When using the thermocouple to detect the temperature of the sensing element of the temperature controller, it is greatly affected by the position of the device, the surrounding air temperature and the external wind flow, and the accuracy of temperature measurement has a large error. The temperature meter guides The temperature is an absolute temperature, the user should choose the temperature according to the practical processing experience and the reference value of the reference temperature table.
4. The machine used by the new device should be smooth to the machine, and pay attention not to use the machine quickly during the running-in period of the machine transmission.
5. The small laminating machine strictly prevents listening to any tools, devices and debris on the machine. The task air gap of the rubber roller and the rubber roller is extremely small. Once any hard object is pressed into the surface of the rubber roller, it is on the rubber Leaving depressions or cracks. The lighter ones need a longer time to recover from the natural elasticity, the heavy ones indirectly make the rubber rollers scrapped.
6. The main power switch of the machine should be closed when repairing and inspecting the machine. The electrical system of the machine should maintain good insulation to avoid moisture. When the machine is stalled, the power supply should be cut off to prevent accidents.
7. The hydraulic system must be unloaded during shutdown, when the pressure roller and the rubber roller are separated and the scraper and the pre-pressure roller are released, so as to avoid the temporary deformation of the two rollers due to pressure.