The automatic laminating machine is divided into three parts: gluing, drying tunnel and hot pressing.
        1. The glue part. The gluing part is equipped with an adjusting device to adjust the amount of gluing to meet the requirements of different printed parts. The gluing roller adopts rubber roller or steel roller.
        2. Part of the drying tunnel. The drying tunnel is generally 2~3m long. The drying tunnel of the automatic laminating machine is equipped with infrared lamps and electric fans. There is also a high-power electric heating tube and exhaust fan on the upper part of the drying path of the automatic laminating machine. The temperature can be adjusted to dry the adhesive and eliminate the exhaust gas.
        3. Hot pressing part. This part is the key to laminating, which is directly related to the adhesion fastness of the automatic laminating machine products. The principle of hot pressing is that the adhesive can quickly infiltrate and penetrate into the surface layer of the printed matter in the molten state, so as to obtain a strong bonding interface layer. The hot pressing part is composed of a group of rollers. One of the hollow metal rollers is equipped with an electric heating tube, and the temperature can be controlled automatically. The pressure of this group of rollers can be adjusted.
        Maintenance method of automatic laminating machine:
        As the saying goes: "Tools don't need to be unknown, brains don't need to be ill." With the development of society, the laminating machine has been widely used. How to maintain the laminating machine has become the main theme of today. The following is how the author introduces how to maintain the laminating machine:
        1. Regularly check the parts of the laminating machine to see if the opening is damaged. If it is damaged, replace it with a new one immediately.
        2. For the water supply of the flower seed planter, adjust (1) Ridge shape adjustment ① Ridge height adjustment: When the earth shovel is lowered, the height of the ridge can be increased, but at the same time, the sowing opener and the depth-limiting barrel should be adjusted to the corresponding When the earth shovel is raised, the height of the ridge can be reduced, and at the same time, the sowing opener and the depth-limiting barrel should also be adjusted downward to the corresponding position.
        3. Operate reasonably in accordance with the rules of the manual, and prohibit all improper operations.

        A good laminating machine not only requires the operation specifications, but also the maintenance is equally important. I hope you strictly follow the regulations on the operation and maintenance of the laminating machine and develop a good habit of using the laminating machine to extend the life of the machine.