1. Automatic paper feeder: The precise design of the feeder feeder enables smooth feeding of thick and thin paper. It adopts a stepless speed change device and is equipped with automatic edge control to adapt to different paper feeds. Sophisticated wind head, it is very convenient to adjust the relative position of the wind head and the paper stack during operation. The unique non-stop paper feed device, which is equipped with an auxiliary table, can replenish the paper while feeding it to ensure continuous production.
        2. Powder removal device (optional combination): adopts two-stage powder removal structure of powder sweeping and pressing powder, the paper passes through the conveyor belt by the brush roller and the brush sweeping powder, so that the dust on the surface is sucked away by the suction fan, and then passes through the electric heating After the pressing roller is rolled, it effectively removes the dust attached to the paper during printing. In addition, the tightly arranged design of the conveyor belt combined with the high-efficiency suction prevents the paper from being displaced or misaligned, so that the paper can be accurately delivered to the nip of the host.
         3. The hard chrome composite roller of the host is equipped with an electric heating system and an automatic temperature control device to make the temperature distribution even. The design of the large-scale composite roller increases the pressing surface: the diameter of the electric heating roller is 420mm, and the inner wall of the roller core is round, so that the roller is not biased and the heating surface is uniform; the diameter of the pressing rubber roller is 360 mm, which ensures the smooth pressing of the OPP film. Stable operation. The hand pressure hydraulic cylinder controls the compound pressure, which can balance the pressure of the left and right rollers. The high-precision hard chrome plated mirror heating roller cooperates with the high-performance pressing rubber roller to perfectly realize the hot laminating process.
        4. The coating oil head is controlled by imported frequency converter. The glue roller is subjected to high-precision grinding and special balancing treatment on the inner wall to more effectively maintain the stability of the coating amount. The coating and metering hard chrome rollers manufactured by high precision The barrel ensures uniform coating amount and achieves precise coating effect. At the same time, two sets of oil pumps and stainless steel oil tanks are standard, suitable for the use of water-based and oil-based glue. It adopts DC motor pressure film coating device, which is stable, fast and easy to operate.

        5. The film unwinding shaft adopts magnetic powder brake to maintain stable tension, and the unique pneumatic film stretching device ensures the pressure