Familiar with the preparation operation before the automatic laminating machine is started
        The laminating process of the automatic laminating machine refers to the whole process of laminating pictures and photos, including film selection, film making, and cutting. Mainly used for post-production of advertising pictures and wedding photos. The pictures covered with film have high anti-corrosion, waterproof, dustproof, anti-wrinkle and anti-ultraviolet erosion performance, which can produce strong three-dimensional sense and artistic appeal. So what should we do before the lamination process?
        Inspection work before laminating machine:
        1. Detection before laminating machine ⑴ Confirm whether the machine is in a safe state.
        2. Film transport adjustment to make the film tension even to adapt to the film transport tension.
        3. Check whether the gap between the glue roller and the glue is parallel.
        4. Check the temperature of the heating roller to avoid inaccurate thermometer.
        5. The pressure that the pressure gauge must reach, otherwise the pressure will affect the product.
        6. Clean the sundries on the rubber roller, so as not to cause waste in the finished product.
        After completing the preparation work, close the main power switch, turn on the heating cylinder and the motor, then turn on the oil pump, adjust the flow rate of the laminating glue, and adjust the parallelism between the rollers. Adjust the measuring position of the paper on the feeding table, apply the film-coated glue, and turn on the drying tunnel for heating. After testing several sheets of film, adjust the heating temperature, pressure and air intake of the heating roller again until the effect is good, and then start normal work.
        Fully automatic laminating is to apply plastic adhesive to the plastic film and print it with paper as the substrate, press it together with the rubber roller and the heating roller to form a product of paper and plastic. Can be divided into mica tape coating, paper coating, advertising consumables coating, aluminum foil coating, suitable for: paper, film, PE, PVC and other roll composite. The fully automatic laminating machine is customized for the world's largest film manufacturer, which realizes automatic film sticking and protects the lens to prevent subsequent processes from scratching the lens.
Description of mirror automatic laminating machine equipment:
        1. Fully automatic film sticking, no manual intervention, close mounting, no bubbles.
        2. According to the size and thickness of the product, the equipment can set the blade type to achieve precise cutting.
        3. Intelligent tool change function (according to the scanned product barcode, automatically identify the blade type).

        4. The equipment has a wide range of applications, such as mobile phone back cover, LCD/LED, etc.