The characteristics of the automatic laminating machine: stable operation, high speed, high precision, and no pollution to the paper surface
        Process flow of automatic laminating machine:
        Rely on the suction and blowing to separate the paper from the stack and transport it to the host
        1. Loose paper blowing nozzle, blow more than ten sheets of paper on the top of the loose paper stack;
        2. The paper separation nozzle separates the top paper from the loose paper;
        3. Press the paper corner to press the unseparated paper;
        4. The paper feeding nozzle conveys the separated single paper forward;
        5. Paper on the flush paper stack;
        6. The paper delivery nozzle continues to feed the single sheet of paper forward to the front gauge for positioning;
        Maintenance method of automatic laminating machine:
        1. Regularly clean the dust, slippery and powder impurities accumulated in the suction cylinder (up and down activities with a little gas oil, clean and dry);
        2. In daily work, due to the accumulation of various impurities on the semi-closed friction surface, it should be cleaned periodically. It can be cleaned with gasoline, either manually or manually. After the dirty oil flows out, wipe it and add lubricating oil;
        3. The nozzle tablet should be replaced regularly;
        4. The air shaft and the air suction tube of the suction nozzle are strictly prohibited to add lubricating oil;

        5. Grease or lubricating oil is often added to the internal eccentric cams, remember not to overdo it;