The precision of the automatic laminating machine is very high at work, especially the surface accuracy and shopping degree of each roller. Once the slightest streaks, cracks, scratches, obscuration, or a slight roundabout deformation. All will affect the processing quality of the product, even not working properly. Therefore, it is very important to protect the fully automatic laminating machine carefully and carefully.
        Daily maintenance method of automatic laminating machine:
        1. Always check the oil pipes, valves and cylinder plugs of the hydraulic system for oil leakage. When oil leakage is found, the sealing ring should be replaced in time, and the appropriate amount of hydraulic oil should be filled into the hydraulic cylinder in time;
        2. Always check whether the rubber roller is stuck with rubber skin or grease, and wipe the rubber traces and dust on the roller in time. Keep the two rolled surfaces clean and dark. The surface of each roller must be kept seriously clean. Always clean the machine immediately after applying the machine. Wash with glue thinner (alcohol or xylene) and wipe each roller with a soft towel. It is strictly forbidden to scrape the surface of the roller with a sharp tool. Every time the machine is turned on, the dust on the surface of each roller should be wiped off. And check whether the surface of each roller of the machine is dark, the machine is malfunctioning or abnormal sound, it should be analyzed in time to find the cause and clear it, and the machine can continue to be applied after everything is normal;
        3. The grounding of the machine and the insulation of electrical appliances should be ensured;
        4. The blade line of the scraping blade should be kept flat and flexible. When there are detours, teeth, curling, etc., it should be repaired and replaced in time. Use 0.15~0.20 mm of manganese steel skin or the blade of the offset press, according to the original specifications Change the size;
        5. Regularly add lubricating oil to the transmission parts and sliding surfaces of the machine to ensure that the machine is in a good lubrication state. Especially for the large bearings of the pressure roller due to the high pressure and high temperature encountered, the lubricating oil is volatilized and lost, and the dwarf high-temperature lubricating oil should be timely so that it can normally perform obligations under high temperature and high pressure;

        6. A comprehensive inspection of the machine should be carried out once a year to find the problem and solve it in time to avoid more serious damage to the machine.