The laminating machine has very high requirements for accuracy at work, especially the surface accuracy and shopping degree of each roller. Once the slightest streaks, cracks, scratches, obscuration, or a slight roundabout deformation. All will affect the processing quality of the product, even not working properly. So it is very important to protect the machine carefully and carefully.
        Protection and maintenance of laminating machine
        1. Regularly check the oil pipes, valves and cylinder plugs of the hydraulic system for oil leakage. When oil leakage is found, replace the sealing ring in time, and fill the hydraulic cylinder with an appropriate amount of hydraulic oil in time.
        2. Always check whether the rubber roller is stuck with rubber skin or grease, and wipe the rubber traces and dust on the roller in time. Keep the two rolled surfaces clean and dark. The surface of each roller must be kept seriously clean. Always clean the machine immediately after applying the machine. Wash with glue thinner (alcohol or xylene) and wipe each roller with a soft towel. It is strictly forbidden to scrape the surface of the roller with a sharp tool. Every time the machine is turned on, the dust on the surface of each roller should be wiped off. And check whether the surface of each roller of the machine is dark, the machine is malfunctioning or abnormal sound, should analyze and find the reason in time and remove it. After the standby device is normal, you can continue to use the machine.
        3. The grounding of the machine and the insulation of electrical appliances should be ensured.
        4. The blade line of the scraping blade should be kept flat and flexible. When there are detours, teeth, curling, etc., it should be repaired and replaced in time. Use 0.15 ~ 0.20 mm manganese steel skin or the blade of the offset press, according to the original specifications Replace the size.
        5. Regularly add lubricating oil to the transmission parts and sliding surfaces of the machine to ensure that the machine is in a good lubrication state. In particular, due to the high pressure and high temperature encountered by the large bearing of the pressure roller, the lubricating oil is volatilized and lost. The dwarf high-temperature lubricating oil should be timely so that it can normally perform its duties under high temperature and high pressure.

        6. A comprehensive inspection of the machine should be carried out once a year to find the problem and solve it in time to avoid more serious damage to the machine.