The motor is the power device of the laminating machine. Our products use 1.5KW motor as the power source, so the protection of the motor is an important part of the equipment. Reasonable use of the motor will extend the service life of the laminating machine and supply the laminating power of the laminating machine.
        1. Remove debris. Eliminate dust on the motor, nearby debris, and accumulated flammable and explosive products.
        2. Before starting, check whether the motor change is sensitive, whether there is conflict, jamming, crosstalk and abnormal sound. With or without jamming, is the belt connection outstanding, and the special transmission belt must not be too tight or too loose.
        3. Before starting, check whether the line voltage is normal. It is not suitable to start if it is too high or too low. Generally, it should not exceed the additional voltage value + 10% ~ -5% before starting.
        4. Rotational disposal. When starting, it should be stopped immediately, after any two-phase power line is reversed and then started, it can be turned forward.

        5. It is necessary to cut off the electric motor for overhauling the motor.