When using a fully automatic laminating machine, pay attention to compounding the prints together. Another biggest feature is that there is no glue coating. When drying, the structure of the laminating machine will be compact and the volume will become smaller. At this time, we must pay attention to the operation of the hot stamping and creasing machine. If the operation is good, the product quality will be good, and the stability of the computer hot stamping machine will be high. During printing, the automatic conveying mechanism can ensure that there is no overlap in the transmission of printed products , And can ensure automatic access to the composite part, most of the machinery uses pneumatic or friction to achieve this, automatic laminating machine is not used, can meet these requirements, can also ensure the accuracy of conveying And accuracy!
        1. The product to be constructed must be straight. Handle uneven paper with "ruffled edge" and "tight edge" phenomena. Paper with "lotus edge" can be baked, and paper with "tight edge" can be hung to dry.
        2. Be sure to wait for the blot to dry before coating, otherwise it will cause blistering or hair pulling.
        3. Spray as little powder as possible during printing, otherwise it will cause emptying and bubbling at the powder pile. Before spraying the film, the powder should be treated. If the number of prints is large, the powder can be hung to dry to remove the powder.

        4. When laminating, attention should also be paid to the direction of the paper strands, especially thick paper, to reduce the phenomenon that the paper is curled due to rolling and stretching.