In printing and other industries, some text files that are easy to fold, wear, or get wet are attached with a layer of plastic film after printing. The file processed in this way is not only waterproof, antifouling, abrasion resistant, folding resistant, and chemical resistant, but also looks more beautiful. The laminating machine is a machine that applies adhesive to the plastic film and presses the paper document together. It is widely used; however, the laminating machine has very high requirements for the accuracy of its internal parts. In daily operation, people may be negligent in maintenance and damage a certain mechanical part, resulting in blurred text. Smooth, there are problems such as scratches. Today, our editor will give you a brief introduction to the maintenance knowledge and precautions of the laminator!
        1. Maintenance of laminating machine
        (1) The rubber roller should be checked frequently for dust, rubber skin and oil dirt on the surface. If there is any, it should be cleaned in time to make the surface bright and clean.
        (2) After each use of the machine, it should be cleaned in time.
        (3) During the operation of the machine, if there is any abnormality, it should be stopped immediately to check, and then find the cause and eliminate it.
        (4) Check the oil pipes, valves, cylinder plugs, etc. of the hydraulic system to see if they are normal and there is no oil leakage. If any, check immediately and replace the sealing ring.
        (5) The hydraulic oil should be checked, whether the oil quality is good, and whether the oil quantity is sufficient, and the oil quantity is insufficient should be replenished in time.
        (6) Each transmission part and lubricating surface should be lubricated regularly, so that the machine can have a good lubrication state.
        (7) The insulation performance of the machine should be good, and the grounding should be firm and reliable.
        2. Precautions for laminating machine
        (1) There should be no flammable or explosive products around the machine, and it is strictly forbidden to put your hand into the danger zone when the machine is running.
        (2) When the machine is scrubbing, it should be turned on at a low speed.
        (3) When overhauling the machine, the main power of the machine should be turned off first.

        (4) It is strictly prohibited to put any objects, tools, etc. on the machine, so as not to affect the normal operation of the machine.