The quotation of the laminating machine uses pre-coated peritoneal technology for laminating processing, without gluing and drying parts. It has short process flow, compact structure, simple operation, low cost, large production flexibility, no solvent odor, no environmental pollution, The laminating quality is good, not only suitable for laminating processing of large quantities of printed products, but also suitable for laminating processing of small batches and scattered printed products such as automated desktop office systems, which has a promising future.
        The quotation of the laminating machine is assisted by the four main parts of uncoated plastic film unwinding, automatic input of printed matter, hot-pressing zone compounding, and automatic rewinding, as well as mechanical transmission, flattening of pre-coated plastic film, vertical and horizontal slitting, computer control system, etc. Device composition. The automatic conveying mechanism can ensure that the printed products do not overlap and enter the composite part at an equal distance during transmission. Generally, pneumatic or friction methods are used to achieve control. The conveying is accurate and high precision. The same requirements can also be met when printed products with small composite width.
        The principle of quotation of laminating machine:
        (1) Using instant film as the cover can protect the paper. After the film is coated, the service life of the cover can be extended, especially for the students' textbooks, so the amount is increasing.
        (2) Imprints are not easily destroyed. After being coated with a ready-to-use film, it can increase the color effect and protect the color printed graphics without being worn. This is conducive to the publishing house editors to make various art designs on the cover or printed surface according to their needs, so it also promotes the increase in usage.
        (3) The production of coating film is beneficial. The production cost of the coating film in the coating is low, easy to start, and profitable, and the enterprise can benefit.
        Laminating machine quotation to check whether the rotating parts are flexible.
        After the above inspections are completed, start the motor for empty machine operation. If there are no other faults, perform the actual trial according to the following items.
        ① Install the required outlet molds and die nozzles as required.
        ②Adjust the temperature of each zone of the host as required.
        ③Inject cooling water into the sink.
        ④ Install the wire on the pay-off stand.
        ⑤Put the core through the horizontal wheel into the mold nozzle as required.
        ⑥The wire core is introduced into the take-up machine wheel through the traction wheel with the preset lead rope.
        ⑦ Start each machine and test it.

        ⑧Check whether the produced wire meets the standard. If there is no abnormality, normal production can be started.