There are many paper cutter product styles of paper cutter manufacturers, including a hydraulic paper cutter. The hydraulic paper cutter is mainly powered by hydraulic pressure, and the drive knife is used to cut the book. The paper cutter has a size display. The size to be cut is displayed with an accuracy of 0.05 mm. The paper pusher has electric and manual adjustments. The electric adjustment has the approximate size and manual fine adjustment.

        So what are the ways to use the hydraulic paper cutter? After checking the machine, it works normally and starts to wait for the task; place the text to be cut in order; adjust the size of the machine to be cut; if the number is relatively large, be sure After cutting all the sides, cut the other side to avoid errors every time the size is adjusted, resulting in a big difference in the entire set of books. When placing text, make sure that the inside of each book is pushed into the space of the pusher. The outside of the text should be smooth by visual inspection; a gray board must be placed on the text during cutting, and the board should be flat, so that there will be no indentation on the cover of the text; the cutter has protection settings, if there are objects Blocking does not work; if the last text has burrs, put a few pieces of waste paper at the bottom, or change the knife strip; the cut text should be stacked neatly and cleanly.