The first one is the cooperation between the tool holder and the spindle. Because the measurement gap occurs during clamping, sometimes there are chips or dirt on the taper shank. Therefore, the positioning of the taper shank will be different every time. Therefore, the imbalance between the tool and the tool holder should be measured before or during use, or the tool can be replaced or moved to reduce the imbalance. Moreover, the above points should be repeated frequently to check the accuracy of the blade to achieve balance.
        The second point is to choose high-quality blades and tool holders, use short blades and lighter blades as much as possible, and regularly check the blades and tool holders to check the degree of wear between them to see if there is any deformation sign. Another point is the technical requirements of blade imbalance, that is, the cutting force and the balance of the machine tool are also key factors in the process of use. To find the best balance method, you can choose different unbalance values for trial operation several times. For example, you can start from the unbalance value slowly decrease until the balanced blade is repeated several times to further improve the work quality.

        When cutting at high speed, we should choose a tool system composed of a symmetrical tool and a tool holder as much as possible. If there are different tool systems, we can first heat the tool holder to expand its empty space. Was clamped. In fact, the most important point for high-speed cutting is to find the best method and the best state to fix the blade. The purpose of this is to make the blade less active.