Paper cutter is ideal for cutting all kinds of paper, photos, art cardboard, hot and cold paper, etc. It adopts active paperweight planning, the blade is specially treated, the cutting is sharp and durable, and the product after cutting is unorganized. hair.
        The standard sample cutter is composed of table, upper and lower cutters, positioning baffle, lever pressing plate, scale baffle and so on. Before the first use, first remove the screw that fixes the tool at the front of the plastic handle. When in use, first lift the tool, put the sample against the ruler side of the table end, push the sample to the positioning baffle, and then hold the tool handle with your right hand to cut it down, you can get the required test kind. After cutting the paper, press the cutter to the right down to the bayonet under the positioning baffle to clamp the cutter to the left, and then pull the cutter up to the right when using it. Note: When the adjacent sides of the sample are not perpendicular to each other, they should be cut into adjacent sides that are perpendicular to each other before cutting the sample.
        The paper cutter should be prevented from being used in wet or dusty environments, and a small amount of lubricating oil should be added to the moving parts every month. If the application is suspended, the upper and lower blades should be modified with a small amount of anti-rust oil to prevent corrosion.
        It is strictly prohibited to cut any metal objects and other high-strength materials to avoid damage to the blade.
        If the incision is uneven, the clamping pressure of the tool can be adjusted appropriately. The specific method is: remove the plastic sleeve at the front of the tool and tighten the nut.
        After the cutting edge is blunt, it can be finely ground with whetstone.

        For cutting paper samples with low basis weight or softness, such as toilet paper, etc., the sample can be clamped in the center of two papers such as copy paper and copy paper before cutting.