The paper cutter has certain requirements when it is used. The following editors will briefly talk about it from two aspects.
        1. In the actual use process, the cutting objects faced by the paper cutter are various, in addition to paper and cardboard, there are leather, plastic, cork flooring and PS version. Due to the wide variety of materials to be cut, different paper presses should be used for different materials, and the angle of the cutting blade should be changed to ensure high-quality cutting products.
        2. A good paper cutter must be equipped with a good paper cutting blade and sharpening process. However, we have found in the after-sales service of the paper cutter that many paper cutter users often ignore this point. As a result, the impact of the cutting blade is increased because of the wrong way, method and angle of the cutting blade. , Resulting in loosening or even breaking of the safety screw, which ultimately causes mechanical damage.

        The range of materials that need to be cut with a paper cutter is becoming wider and wider, such as beer aluminum foil caps, carbonless carbon paper, honeycomb paperboard, magnetic cards, and photosensitive films. These materials will encounter different practical problems during the cutting process. For example, carbonless copy paper is prone to indentation during cutting, and the magnetic card and photosensitive film may not be fixed by the paper presser during cutting, resulting in the cutting of waste products. These problems can be solved by adjusting the pressure of the paper press, improving the blade and cutting transmission system. However, as far as I know, only some paper cutter manufacturers in China can solve all these technologies.