Program-controlled paper cutter is a paper cutting method that realizes the automatic positioning of the paper pusher through the program control system and can also perform the positioning method of the electric paper cutter. Points to note when using a programmable paper cutter.
        1. When starting the cutter, you must pay attention to the surrounding environment to see if anyone is doing other work on the machine.
        2. The first thing to check after starting the machine is whether the photoelectric protection switch of the paper cutter is abnormal, to ensure the reliability of the machine.
        3. If an unexpected situation occurs after driving, or there are abnormal sounds and jams, you must stop immediately to check the cause.
        4. It is strictly forbidden to reach into the rear of the cutting knife during the operation of the machine. It is strictly forbidden to change or adjust the hand under the knife in the parking situation in time.
        5. The control part must be checked frequently, the machine is not allowed to have a little bit of knife at any time.
        6. After using the long-handle bolts and handles for the knife change and test drive of the paper cutter, they must be removed to avoid injury to people when the machine is started.

        7. When repairing, adjusting, refueling, wiping and inspecting the machine, the power supply must be cut off to avoid danger.